©2015 WOO AUDIO
tm
Inc. All rights reserved.
www.wooaudio.com
Rev 1.0. July 27, 2015
15
The LED and the tubes do not light.
First check if the AC cord is installed. Then, check if the fuse is burnt. See the following
instruction on how to replace a fuse. The fuse type is 2-3A, slo-blo.
ð
ð
Insert a small flat
screwdriver into
the fuse door
which located on
the AC inlet.
Release the fuse
door by pulling it
out.
The fuse holder is
released from the
AC inlet.
The fuse is held by
a clip
.
ð
