©2015 WOO AUDIO
tm
Inc. All rights reserved.
www.wooaudio.com
Rev 1.0. July 27, 2015
11
Multi-functional output switch diagram
Break-in period:
It is recommended to allow the amplifier to operate 150+ hours so that peak
performance can be realized. An effective way to break-in the amp is to run the amp
normally with music playing.
Please do NOT leave the amplifier ON while away and unattended.
Warning:
The amplifier MUST have a “load” via the headphones or speakers (WA5) when powered
ON. Running the amplifier without a “load” could damage to power transformers.
SPK –
Speaker output (WA5 only)*
* MUST have speakers connected at all times while in this setting
HI
– High power output setting (headphones)*
* MUST have headphones connected at all times while in this setting
LO
– low power output setting (headphones)
Note: Power OFF amplifier prior to changing power output setting to
avoid “POP” sound.
