08
MIN PTZ CAMERA
09
MIN PTZ CAMERA
PTZ SETTING & INSTALLATION
PTZ SETTING & INSTALLATION
2. Installation & Cable connection
RS-485 Termination
In RS-485 communication, the first and last devices (PTZ or keyboard controller) should be terminated for more
stable data communication by setting DIP switch. Without proper termination, there is potential for control
signal error. Total length of the cable for communication should NOT exceed 1.2Km (twisted pair).
To extend distance, use qualified RS-485 repeater.
ⓑ
ID Address Select
ⓒ
Extra Video out
Precautions for Installation
- Ensure that the installation location can safely bear min. 2Kg and its installation fittings.
- When installing the ceiling bracket, use the supplied fixing screws(#8x38) or similar screw head.
- Do not drop the product during installation.
- Do not allow anyone to stand below the installation area.
STEP 1
STEP 2
Prepare the installation accessories provided in the
camera box. The Video and RS-485 control cables,
Power adaptor (over 1A) and installation tools are
necessary to complete the installation.
For cable connection, make a hole (Hole size 70mm)
in the ceiling where you want to install the camera.
Attach the installation bracket with the included
3 fixing screws(#8x38).
STEP 1.
STEP 2.
Camera address is decided to the sum of indicated DIP switch
number and Maximum address number is 255.
Ex) To set the address 27, DIP switch 1, 2, 4 and 5 should be ON.
When the camera installed surface mount, use the included Extra video cable.
ⓓ
Alarm In and Relay out
It supports 2 Alarm input and 2 relay out with Normal Open method.
ⓔ
Power, RS-485 and Balun
* For all of below connection, check the polarity carefully.
1) 3pin Power connector
2) Balun Video out
3) RS-485 communication
1) Surface Mount
Before installation, assemble included Surface mount Bubble
kit like below pictures and set the camera DIP switch setting.
< Surface Mount >
Dome
PTZ
Surface
Mount deco-Ring
The external cables (video cable, controller cable
and power) should be inserted into the center hole
of the bracket.