7
Placing the fuel matrix
Position fuel matrix on top of the burner as
shown in figure 9. The rear face of the burner
should locate into two cut-outs on the top
face of the rear legs. Ensure that the matrix
sits flatly on the top of the burner.
Placing the dress coals
The dress coals consist of:
•
2 x Finger coals
•
4 x Square
•
15 x Random cut coals
Keep the different types of coals separate.
Begin the coal build by placing a square coal
in the centre of the front coal, ensuring that it
bridges across to the matrix as shown in
figure 10.
Next, take four random coals and place along
the front coal as shown in figure 11. Again,
ensure that these coals bridge across from
the front coal to the matrix.
In order to get the best flame effect, it is
important that the coals are evenly spaced,
and sit 10-15mm from each other.
Figure 9
Figure 10
Figure 11
