background image

Nutri-Pot

Supreme House, 7th Floor, Plot No. 94-C, Opp. IIT Main Gate Powai, Mumbai - 400076,

Maharashtra, India. 

C

ustomer 

C

are Number: 

09

152

7

2

94

5

5*  [email protected] | www.wonderchef.com

*

S

tandard char

g

es apply.

N

Error Code

Error Code

Error Code

Error Code

Unable to lock 

the lid

Unable to lock 

the lid

Air leakage from 

the rim of the lid 

Float is blocked by the rod

The sealing ring may not be 

installed properly

Float is blocked by the rod

Something must be stuck on 

the sealing ring

Sealing ring is not installed

Sealing ring has worn out

The lid does not lock properly

Air leakage from 

the float valve

clean the sealing ring

install the sealing ring

check and judge the switch, 

change if necessary

Sensors are short-circuited

Sensors are disconnected

and 

Air leakage from the rim of the lid 

or the pressure limit valve

d

Something must be stuck on 

the sealing ring or float valve

Sealing ring for float has worn out

change the sealing ring for float valve

The float does not 

rise up

The pressure limit valve is not 

in position

Not enough food and water

Over-heating

Pressure is not enough or pressure 

switch is aging

add more water

Summary of Contents for Nutri-Pot G1











Reviews: