5.8
RTU
The RTU page is only for LR100 series. Since, the LR100 supports standard LoRaWan
architecture and provides RS
-
485 interface for Modbus RTU slave device connection.
Therefore, the LR100 provides RTU setting page for RTU Device parameter setting.
RTU Name:
Give a Name for the RTU device. The Name will forward to Gateway as a Tag
Name for recognize.
Local Analog Input for Voltage and Current:
LR140 supports 2 Channels Voltage
measuring and 2 Channels Current measuring functions. The internal RTU information
shows as below table:
RTU Name
Modbus Slave ID
Start Address (PLC)
Length
VIN0
10
1017
1
Diagram 5.7
-
1 RF
-
Radio Signal Strength Table
Diagram 5.8
-
1 RTU Configure Page
RTU
