5
LoRa Utility Configuration
The LoRa Node device must configure before installed on the filed
-
site, the LoRa Utility
could be down
-
load from the website:
Connects the LoRa device with computer and power reset the LoRa device, then the LoRa
device will into configure mode when detected the USB mode change. During the
configuration mode, all of new system settings will not effective until next power reset.
5.1
Connects LoRa device with LoRaUtility
The LoRa Utility is un
-
installed, ensure the LoRa node device have powering on,
connecting with PC via USB cable before execute the Utility – “ LoRaUtility.exe”.
The Utility main screw show as below diagram “ 5.1
-
1 Full Function TAB”
Click “COM” and select the USB mapping com port number. Diagram 5.1
-
2
Diagram 5.1
-
2
Diagram 5.1
-
1 Full Function TAB