WOLSELEY CENTER 340017, User Manual

Page: 8 / 12

8
Save energy by switching the heating off when not required - e.g. during warmer summer
months, or when doors and windows are open for extended periods of time. If the
temperature drops to 5°C the heating will come on to prevent the heating pipes freezing.
Press
to switch the heating off - the display will show OFF
Press a gain to switch the heating on - the display will show or
Your Thermostat has optimisation functions that aim to save energy while maintaining
suitable comfort levels. The Thermostat displays during the optimisation period if set.
By default optimisation is disabled, see instructions on installation guide on how to
activate it.
• Optimum Start learns how long it takes your home to reach a set temperature and then turns the
heating on a bit earlier to achieve that temperature at the programmed time.
• Optimum Stop saves energy by switching off a little bit earlier than the programmed time. If your
home is up to temperature, you will not notice the effect on the temperature, but you should see a
difference in your fuel bill.
Standby mode (with frost protect)
off
Optimisation
4. Optimisation