29
One Push White Balance:
Press the
LIGHT
key
(#16)
for 2 seconds to perform one push white balance.
Activating the on-screen menu:
Press the
MENU
key
(#60)
(
EXTERN
key) on the camera head for 2 seconds to activate the on-screen
menu. Use the
FOCUS
keys
(#58)
to navigate and the
FREEZE
key
(#56)
,
PRESET
key
(#57)
to select.
For the help function, press the
? HELP
key
(#59)
.
For resetting only the selected item press the
? HELP
key
(#59)
for 2 seconds
Activating the on-screen Extra menu:
Press the
MENU
key
(#60)
and keep it pressed until the extra menu appears
Resetting the output mode to the default of "XGA at 60Hz":
Simultaneously press both
FOCUS
keys
(#58)
on the camera head and keep it pressed until the resolution
will be changed
Storing Preset 1:
Press the
PRESET
key
(#57)
on the camera head for 2 seconds.
Recalling Preset 1:
Press the
PRESET
key
(#57)
on the camera head quickly.
.
.
.
CODES - Short Keys
Storing presets:
Press the desired
PRESET
key
(#38)
for 2 seconds.
Recalling presets:
Press the desired
PRESET
key
(#38)
quickly.
Activating the on-screen menu:
Press the
MENU
key
(#54)
to activate the on-screen menu. Use the
Navigation
keys
(#32 and #53)
to
navigate and
OK
key
(#33)
to select. For the help function, press the
? HELP
key
(#31)
.
For resetting only the selected item press the
? HELP
key
(#31)
on the remote control for 2 seconds
Activating the on-screen Extra menu:
Press the
MENU
key
(#54)
and keep it pressed until the extra menu appears
Resetting the output mode to the default of "XGA at 60Hz":
Simultaneously press both
FOCUS
keys
(#42)
on the remote control and keep it pressed until the
resolution will be changed.
Change IR code:
Change the IR code in the
"Advanced Settings / Miscelaneous Settings" and set the "IR
Code" to A, B, C or D (code A is default). To change the IR code on the remote control, simultaneously
press ress
PRESET 1, PRESET 2
keys
and the
ZOOM TELE
key
ress
PRESET 1, PRESET 2
and
ZOOM
WIDE
.
.
on-screen menu
p
(#38)
(#45)
. Each time this key
combination is used, the code switches from A to B, C, D ... A ... in the order given.
For resetting the remote control to code A, simultaneously p
.
The LED on the remote control shows the selected code (it flashes one time for code A, two times for code
B, three times for code C and four times for code D).
IR-Remote Control
Base and Camera head
