25
MAINTENANCE
WARNING:
Never use strong cleaning agents such as acetone or benzene!
These substances can damage the surface and anti-reflex coating!
Cleaning
Cabinet
:
Clean the cabinet by gently wiping it with a soft, lint-free cloth.
Lenses:
Clean the lenses by gently wiping them with a soft, lint-free cloth (do not use a paper tissue!).
Clean by breathing on the lenses to create moisture then wipe with lint-free cloth (If not clean,
use special optical cleaner only!).
IMPORTANT
Firmware Upgrades
Please note that an infrared remote control can only be used up to a certain distance from the unit. Objects
situated between the Visualizer and the infrared remote control, and weak batteries, interfere with
reception.
Infrared Remote Control
CAUTION
Risk of explosion if batteries are replaced by an incorrect type.
Dispose of used batteries according to the instructions. Recycle the batteries.
ATTENTION
Il y a danger d‘explosion s‘il y a remplacement incorrect de la batterie. Remplacer uniquement avec une
batterie du même type ou d‘un type équilanent recommandé par le constructeur.
Mettre au rebut les batteries usagées conformément aux instructions du fabricant. Recycler les batteries.
If the Visualizer can only be controlled from a close distance, you may
need to change the batteries.
If the Visualizer cannot be controlled at all with the infrared remote control,
you may need to check the code or to change the batteries.
Open the cover on the back of the remote control and replace both 1.5V
AAA (Code LR03) batteries with new ones of the same type.
Check the polarity of the batteries!
If you want to work with more than one Visualizer in the same room, the units should be set to different
infrared codes, in order to control them all individually.
The IR code of the Visualizer has to match the code of the remote control.
To change the IR code, enter the
"Advanced Settings / Miscellaneous Settings" and
set the "IR Code" to A, B, C or D (code A is default). To change the IR code on the remote control,
simultaneously press
PRESET 1,
PRESET 2
and
ZOOM TELE
ress
PRESET 1, PRESET 2
and
ZOOM WIDE
on-screen menu, go to
(#38)
(#45)
.
Each time this key
combination is used, the code switches from A to B, C, D ... A ...in the given order.
For resetting the remote control to code A, simultaneously p
.
The LED shows the selected code (it flashes one time for code A, two times for code B, three times for code
C and four times for code D).
Different IR Codes
The firmware (software) of your Visualizer (including the o
) can easily be upgraded to the
latest version. The firmware update can be done via USB, Ethernet (LAN) or USB stick.
Firmware update files can be downloaded free of charge at
www.wolfvision.com
(Support)
.
Updates via USB or Ethernet/LAN can be made with the software vSolution Link by WolfVision.
Updates via USB stick need the firmware file to be placed in the folder root:\WOLFVISION\
(default folder can be changed in the on-screen menu Advanced Settings / USB Settings).
Alternatively, the firmware update can be started in the on-screen menu (Advanced Settings / Device Info),
provided the Visualizer is connected to the Internet and a nameserver IP address is assigned (Advanced
Settings / Ethernet Settings). By selecting the line ”Check For FW Update”, the Visualizer checks the
WolfVision server for newer firmware files. Follow the on-screen instructions to start the update process.
n-screen HELP
