WolfVision VZ-15b Instructions Manual Download Page 2

Make sure that sufficient air circulation for cooling the unit is possible (ventilation slots on the 
left and right side of the unit)

 
If the Visualizer is not used for a long time turn off the main power switch (#34)!

If there is any abnormality (abnormal noise, smell, smoke etc.) turn the power off immediately 
and contact your Visualizer dealer!

  USE  THIS  MACHINE  ONLY  WITH  THE  CORRECT  VOLTAGE  AS  
  SHOWN ON  THE  TYPLABEL !

Do not use a damaged power cord. This may cause short circuits or electrical shocks!

Do not modify the Visualizer or operate it without the cover panel firmly in place, to prevent danger!

  DO  NOT  EXPOSE  THE  UNIT  TO  EXTREME  HEAT  OR  MOISTURE !

Do not expose the Visualizer to water, metallic objects or any flammable material.

Do not place liquids or wet objects on the working surface! Put them in front of or behind the 
unit and use it as a camera. If you work with wet hands, cover the remote control with plastic wrap!

  DO  NOT  CARRY  THE  VISUALIZER  HOLDING  IT  ONLY  BY  ITS  MIRROR  ARM  (#1) !

  DURING  TRANSPORTATION  PROTECT  THE  UNIT  FROM  EXCESSIVE  SHOCKS !

Avoid installing the Visualizer in environments where there are radiations.

Avoid installing the Visualizer in locations exposed to strong magnetic fields or electrical 
currents. This could cause monitor image distortion or even damage to the CCD camera.

PRECAUTIONS

2

UL

®

FCC

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the interference at his own expense.

This product is built according to Directive EMC and to Directive electrical equipment. 

Proofments according to UL 114.

RISK OF ELECTRIC SHOCK

DANGEROUS VOLTAGE INSIDE

WARNING!

Summary of Contents for VZ-15b


























Reviews: