
WM8973-EV1M
w
Rev 1.0, February 2005
9
LINKS, JUMPERS AND SWITCHES
LINKS AND JUMPERS
LINK/JUMPER STATUS
DESCRIPTION
J18 (BCLK)
OPEN
SHORT
Master mode
Slave mode
[default setting]
J20 (ADCLRC)
OPEN
SHORT
Master mode
Slave mode
[default setting]
J25 (DACLRC)
OPEN
SHORT
Master mode
Slave mode
[default setting]
J23
OPEN
SHORT
Master mode
Slave mode (Ties ADCLRC to DACLRC)
[default setting]
J32, J33, J34 and J35
OPEN
SHORT
OUT signals are AC coupled
[default setting]
OUT signals are not AC coupled
J37 (external speaker connection)
Pin 1 – AGND
Pin 2 – +ve speaker connection
J38 (external speaker connection)
Pin 1 – AGND
Pin 2 – -ve speaker connection
J6 (DC input connection)
Pin 1 – DC signal input
Pin 2 – AGND
J11 (DC input connection)
Pin 1 – DC signal input
Pin 2 – AGND
Table 7 Links
SWITCHES SWITCH
STATUS
DESCRIPTION
SW6
After an input data format change has been made using
SW3, the CS8427 will only latch the new settings after
SW6 has been pressed and released.
SW3
(DATA FORMAT)
1 2 3 4 5 6 DATA FORMAT
1 0 0 1 0 0 I2S Compatible
[default setting]
1 0 0 0 0 1 24-bit Right Justified
1 0 0 0 0 0 Left Justified
SW4
(Software Control)
Pins 1 and 2 SHORT
Pins 2 and 3 SHORT
3-wire (SPI) Control Mode
[default setting]
2-wire Control Mode
SW1, SW2
(R/Line Input 1 Select)
Pins 1 and 2 SHORT
Pins 2 and 3 SHORT
MIC Input Select (3.5mm Jack Socket)
Line Input Select (Phono Socket)
[default setting]
SW5, SW7
(R/Line Input 2 Select)
Pins 1 and 2 SHORT
Pins 2 and 3 SHORT
MIC Input Select (3.5mm Jack Socket)
Line Input Select (Phono Socket)
[default setting]
SW8, SW9
(R/Line Input 3 Select)
Pins 1 and 2 SHORT
Pins 2 and 3 SHORT
MIC Input Select (3.5mm Jack Socket)
Line Input Select (Phono Socket)
[default setting]
SW27, SW28
(R/LOUT 1 Select)
Pins 1 and 2 SHORT
Pins 2 and 3 SHORT
HP Output Select (3.5mm Jack Socket)
Line Output Select (Phono Socket)
[default setting]
SW36
Pins 1 and 2 SHORT
Pins 2 and 3 SHORT
Connects to OUT3 for HP output DC reference
Connects to GND for HP output reference
[default setting]
Table 8 Switches
Summary of Contents for WM8973-EV1B
