12
⑧
To enable or disable Input/output tags displaying when setting buttons on “Setting” page
focused
⑨
Device information display area
⑩
Input/output port connection status
Set TCP control configuration
Click Config button to show TCP configuration window.
①
Set tag to identify Matrix device
②
Set IP mode: Subnet should support DHCP protocol when set Auto IP mode, then Matrix
device will obtain IP automatically. Otherwise, set Static IP mode and designate a useable
IP for Matrix device
③
Set IP address, not editable when Auto IP mode selected.
Note
: The last IP BYTE’s range
is 2-252.
④
Matrix device MAC address
⑤
Click OK to set configuration. If configuration is set OK, Matrix devices will be searched out
again
⑥
Click to Close the window and configuration cancelled
“Port Tag” page
5
4
3
2
1
6
