4K IP Streaming Extender
13
Note:
Offline Mode can be used for testing purposes.
Upon launch, the IPA Manager’s main interface will appear as shown in the picture
below:
5.2
Device Configuration
Before starting the IPA Manager application, make sure it is connected either directly to
the network switch or to the Gigabit Ethernet port on one of the devices (TX or RX).
Now launch the application. Upon launch, the IPA Manager main window will open up in
the “Video Switching” tab. It will discover all the TX and RX devices on the network and
display them inside the application.
All connected devices on the network will appear as a gray tiles within the application
window.
Each tile will identify the “Hostname” of the device. The default device “Hostname” is
the MAC address. Note that the “Hostname” can be updated at any time. The “IP
Address” of the device is also indicated within the tile.
