Wolfgang Puck BKMT0020, Use And Care Manual

Page: 7 / 16

Operating Your Mixer Care and Cleaning
Place the Mixer on a dry, level, stable surface.
Place the Mixing Bowl on to the Motor Housing.
Select the desired attachment and place on the Drive Shaft of the
Mixing Bowl.
Add your ingredients to the Mixing Bowl. Always place wet
ingredients in the mixer followed by dry unless the recipe states
otherwise.
Warning: Ensure that the Mixing Bowl is properly seated on the Motor
Housing before operating your Mixer to avoid damaging the Drive
Shaft or Motor Housing.
Place the Bowl Lid on the Mixing Bowl and turn clockwise until it
stops, place the Center Lid on the Bowl Lid and turn clockwise until it
stops.
Plug Mixer into outlet. The Control Panel lights will flash once and
the speed indicator will continue flashing to let you know you are in
standby mode.
Press the Start/Stop button. The Mixer will default to Speed 1 and the
Timer will show four zeros.
To adjust Timer press the Speed/Time button until the Timer Display
begins flashing. Press + or - to set time in 30 second increments up to
15 minutes.
Note: The Timer must be set for the mixer to run. If you want to
adjust the Timer while the mixer is running press the Speed Timer
button. The Timer will pause and begin flashing (while motor is
running). Press the + or - button to your new desired time in 30
second increments up to 15 minutes. Press Speed/Timer to start the
countdown timer using the new time. To reset the timer press and
hold the - button until the display shows 0000.
Note: To pause the mixer at any time press the Start/Stop button,
press a second time to restart with existing settings.
To adjust speed setting press Speed/Time button until the speed
indicator light begins flashing. Press + or - to set speed. If you want
to adjust the speed while the mixer is running simply press the + or
- button to your desired speed. To pause the mixer at anytime press
the Start/Stop button, press a second time to restart with existing
settings.
Note: The speed can only be set from 1 to 5, or from 5 down to 1.
The – button will not work if you are on Speed 1, and the + button will
not work if you are on Speed 5.
Press the Start/Stop button to turn the appliance off, then unplug
from the outlet when not in use, before assembling or disassembling
parts and before cleaning. To unplug, grasp the plug and pull from the
outlet. Never pull from the power cord.
Do not immerse the Motor Housing or power cord in water or any
other liquid.
Wipe the Motor Housing and cord with a damp nonabrasive wet cloth
and dry thoroughly.
All parts except the Motor Housing and Power Cord are dishwasher
safe or can be hand washed with warm soapy water, rinsed, and dried
thoroughly.
We recommend removing the Drive Shaft from the Mixing Bowl
before cleaning. See Disassembly and Assembly of Attachments
section of this manual.
1
2
3
4
5
6
7
8
9
10
11
•
•
•
•
•
11 12