20
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 | www.wolff-tools.de
7.0 Trouble shooting
Fault
Possible cause Remedy
8.0 Disposal information
Disposal
The machine, accessories and packaging should be sorted
for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into household
waste! According the European Guideline
2002/96/EC for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an environmen-
tally correct manner.
Subject to change without notice
9.0 Guarantee
The warranty period for new Wolff machines shall last for
one year from the point at which the machine is transfer-
red / delivered to the customer, insofar as statutory legal
requirements do not stipulate otherwise.
When validating warranty claims, the invoice or proof of
purchase must always be submitted.All repairs within the
framework of the warranty agreement must be undertaken
by a service Centre that has been accredited by us.
Customers performing their own repairs and/or improper
repairs regularly lead to the exclusion of warranty claims.
The same also applies to incorrect operation and/or use.
Replacement of parts, accessories and other modifica
-
tions to Wolff machines
Users of Wolff machines enjoy a high level of safety and
reliability of their machine. In order to maintain this status
quo, your Wolff tool may not be modified from the condition
in which it is delivered without following the rules below.
These rules apply to both the replacement of parts and
equipping the machine with accessories as well as other
technical modifications.
All work undertaken to your Wolff machine must be
undertaken exclusively by a workshop that
has
suitably trained and experienced personnel at its
disposal, as well as the requisite work equipment.
We recommend using authorised service Centre.
In the event of planned replacement of parts, planned
addition of accessories or other planned technical
modifications, an assessment must always be carried
out by an authorised
service Centre or us, as manu-
facturer, before work is commenced.
It is highly recommend that only safety-approved Origi-
nal Wolff replacement parts and Original Wolff ac-
cessories are used, which have been approved by
us, as manufacturer. Replacement parts and acces
sories can be obtained from your authorised service
Centre, which will also be able to undertake professio-
nal installation on your behalf. Original Wolff replace
ment parts and Original Wolff accessories have been
checked for safety and suitability especially for Wolff
machines.
We are unable to adequately assess the safety and
suitably of non-Original Wolff replacement parts.
In order to preserve operational safety and to prevent
damage in the event of technical modifications, of
whatsoever nature, our technical guidelines
must
always be observed
. We are also always happy to
hear from you should you have any other questions
about your Wolff machine.
Please note that we cannot accept any liability for
damage, insofar as this is sustained as the result of
incorrect work undertaken or as the result of violation
of the rules stated above.
The machine
does not start
Power supply
Disconnected-
blown fuse
defective cable or
plug
Contact Electrici-
an.For repair and
/or replace parts
The machine
does not start
Machine over-
loaded
Tilt the machine
over the transpor-
tation wheels. The
plate is unloaded.
Start the machine
and lower it slowly
on the floor
EN
