16
I N T E G R AT E D
F R O N T P A N E L
I N S T A L L C L E A T S A N D P L A T F O R M
For an overlay or inset application, you will
need to install a recessed platform and cleats
of the following dimensions into the opening.
Top Cleat Dimensions
29
1
/
2
" (749) W x
1
/
2
" (13) H x 2" (51) D
Side Cleat Dimensions
1
/
2
" (13) W x 9
1
/
8
" (232) H x 2" (51) D
Platform Dimensions
29
1
/
2
" (749) W x
5
/
8
" (16) H x 23
3
/
4
" (603) D
Depth of platform may increase depending
cabinet depth.
For an overlay application, the platform and
cleats will need to be recessed
3
/
16
" (5). For an
inset application, they must be recessed
3
/
16
"
(5) plus the thickness of the decorative drawer
panel, allowing the decorative panel to be
flush with the front of the cabinet. Be sure to
rigidly mount the platform so that it can
support a minimum of 200 lbs (91 kg). Refer to
the illustrations below.
IMPORTANT NOTE: In an overlay application,
be sure to recess the cleats no more than
3
/
16
"
(5). Recessing deeper than this may cause the
drawer to not close properly.
W O L F
WA R M I N G D R AW E R
IMPORTANT NOTE: Be sure to finish the
inside lip of the opening and the front face of
the shelf and cleats. Some of these areas will
be visible when the drawer is open.
IMPORTANT NOTE: Be aware of the location
of the mounting holes on the warming drawer
frame to make sure the screws used to attach
the cleats do not interfere with the screw holes
for mounting the warming drawer.
Platform
Top Cleat
Side Cleat
Cabinetry
Opening
Cleats and platform
recessed
3
/
16
"
(5)
plus thickness
of decorative panel
Platform
Top Cleat
Side Cleat
Cabinetry
Opening
Cleats and platform
recessed
3
/
16
"
(5)
Recessed cleats and platform –
inset application
Recessed cleats and platform –
overlay application
