13
Dimensions in parentheses are in
millimeters unless otherwise specified.
W O L F G A S R A N G E T O P
O P E R AT I O N
B L A N K - O F F P L A T E
To give the charbroiler a more even heat
output, install the blank-off plate packaged in
a separate envelope with your gas rangetop.
This 2
3
/
4
" x 11" (70 x 279) stainless steel plate
is placed directly on the ceramic tiles.
IMPORTANT NOTE: Install the blank-off plate
when the charbroiler is off and is completely
cool. Be sure to remove the plastic film from
the blank-off plate before installing.
To install the blank-off plate, remove the
stainless steel grate and wire mesh screen.
Position the blank-off plate in the middle of the
ceramic tiles and reinstall the wire mesh
screen. Make sure that the wire mesh screen
is positioned with the notch at the left rear.
Reinstall the stainless steel grate. Refer to the
illustrations below.
I N F R A R E D
C H A R B R O I L E R
This optional feature is designed with a 16,000
Btu/hr (4.7 kW) infrared burner to give the
highest quality and most efficient method of
gas grilling. The burner becomes an orange-
red color at the surface of the ceramic tile, and
when it glows, it transfers an intense heat to
the food. This sears the outside of the food,
leaving the inside tender and juicy.
The infrared burner is designed to operate at
100% heat output. HIGH is the only setting on
the knob. For even cooking, we recommend
using the charbroiler blank-off plate when
grilling most food.
Use caution when placing the blank-off
plate directly onto the ceramic tiles so
they are not chipped or otherwise
damaged. Avoid any contact with the
igniter; it is fragile and can chip or break.
Wire Mesh
Screen
Blank-Off
Plate
Igniter
Blank-off plate installation
Stainless
Steel
Grate
Charbroiler stainless steel grate
Do not use cookware on the charbroiler
grate.
