Pro Island Hood Installation
17
wolfappliance.com/specs
Complete the Installation
INSTALL FILTERS
Reinstall the internal frame on the island hood. Refer to
hood preparation on page 11.
Slide the grease cups along the bottom edge of the hood
so that the lip of the grease cup overhangs slightly.
To install the filters, orient each filter with lines running
vertically. Position the top edge of the filter as shown in
the illustration below. While pressing up against the
spring, rotate the bottom edge of the filter into position
next to the grease cup. Gloves should be worn when
handling filters.
LOGO NAMEPLATE
The Wolf logo nameplate does not come installed on the
island hood since there are various locations that the
nameplate can be attached.
Once you've decided on the location for the nameplate,
clean the mounting area with rubbing alcohol. Remove the
backing paper from the nameplate. Position the nameplate
aligned parallel with the bottom edge of the hood and
press into place.
GREASE CUP
SIDE VIEW
FILTER
SPRING
Filter installation.
