Pro Island Hood Installation
14
Internal Blower
IMPORTANT NOTE:
Refer to specific installation instruc-
tions provided with each blower assembly for additional
mounting and wiring instructions.
BLOWER INSTALLATION
1)
Discard the hex nuts provided with the blower.
2)
Lift the blower assembly into position inside the hood.
3)
Engage the two tabs on the blower into the two slots in
the top plate of the island hood. Secure the blower to
the threaded studs with two hex nuts (provided with
blower). Refer to the illustration.
5)
Plug the blower power cords into receptacles located
near the center of the hood shell. Use the clips on the
interior of the hood to secure excess power cord.
6)
Once installation of the blower is complete, reinstall the
internal frame and filters. Refer to complete the instal-
lation on page 17.
IMPORTANT NOTE:
Before turning electrical power on to
the ventilation hood, make sure the blower is off.
THREADED
STUD
HEX NUT
SLOT
TAB
Internal blower.
