TIMER (See Figure 3-3):
1.
Touch TIMER/CLOCK pad. will appear in the display. Press the
number one (1).
2.
Enter time.
3.
Touch TIMER/CLOCK pad again. To cancel timer, touch STOP/CLEAR pad.
to set timer
press 1 to set clock
press 2
enjoy
your
micro-
wave
touch
clear
and
touch
clock
error
:
Drawer Microwave
(Models MWD24-2 / MWD30-2)
Theory of Operation
#813632 - Revision B - December, 2009
3-2
Figure 3-1. Getting Started
Figure 3-2. Setting the Clock
Figure 3-3. Setting the Timer
Touch TIMER/CLOCK pad and then the number 2
Touch TIMER/CLOCK pad and then the number 1
enjoy
your
micro-
wave
touch
clear
and
touch
clock
USER OPERATION
Before operating drawer microwave, make certain you read and understand the operation instructions completely.
Before the drawer microwave can be used, follow these steps:
1.
Plug in drawer microwave. will appear in the
display (See Figure 3-1).
2.
Touch the STOP/CLEAR pad (See Figure 3-1). will appear in the display.
3.
Set clock (proceed to steps below).
to set timer
press 1 to set clock
press 2
TO SET THE CLOCK (See Figure 3-2):
1.
Touch TIMER/CLOCK pad. will appear in the display. Press the
number two (2).
2.
Touch number pads for correct time of day then, touch TIMER/CLOCK pad again.
This is a 12 hour clock. If you attempt to enter an incorrect clock time, will appear in the display. Touch the
STOP/CLEAR pad and re-enter the time.
If the electrical power supply to your drawer microwave should be interrupted, the display will intermittently show
after the power is reinstated. If this occurs dur-
ing cooking, the program will be erased. The time of day will also be erased. Simply touch the STOP/CLEAR pad
and reset the clock for the correct time of day.
NOTE:
The drawer microwave can be programmed with the drawer open except for START/ADD MINUTE.
