background image

14   

|

   Wolf Customer Care 800.222.7820

OVEN OPERATION

Self-Clean

During self-clean, the oven is heated to an extremely high 
temperature to burn off food soil. Remove all oven racks 
and rack guides. They will discolor if left in during self-clean. 
The oven door will lock and remain locked until self-clean 
is complete and oven temperature has cooled below 300°F

 

(150°C)

. Self-clean times include one hour for cool down.

Setting controls for 4-hour self-clean:

1

   Rotate mode selector knob to CLEAN.

2

   Touch  ENTER.

Setting controls for 3-hour self-clean:

1

   Rotate mode selector knob to CLEAN.

2

   Touch STOP TIME.

3

   Touch down arrow to reduce stop time by 1 hour.

4

   Touch ENTER twice.

 CAUTION

During self-clean, exterior surfaces may get hotter than 
usual. Children should be kept away.

Auto Program

TIMED COOK

Timed cook automatically turns the oven off at a specified 
time. The oven will begin to heat immediately and will turn 
off at the desired stop time. The clock must be set to the 
correct time for timed cook to function properly. Use in 
any cooking mode except broil, convection broil and bake 
stone.

Setting controls:

1

   Rotate mode selector knob to desired cooking mode.

2

   Touch ENTER to select preset temperature or turn tem-

perature control knob to change temperature.

3

   Touch COOK TIME. Use arrows to select desired cook 

time in hours and minutes.

4

   Touch  ENTER. 

DELAYED START

Delayed start automatically turns the oven on and off at 
specified times. The oven will remain idle until the desired 
start time and will turn off at the desired stop time. The 
clock must be set to the correct time for delayed start to 
function properly. Use in any cooking mode except broil, 
convection broil and bake stone.

Setting controls:

1

   Rotate mode selector knob to desired cooking mode.

2

   Touch ENTER to select preset temperature or turn tem-

perature control knob to change temperature. If ENTER 
is touched, oven will begin to heat immediately, but will 
enter idle mode once stop time is set.

3

   Touch COOK TIME. Use arrows to select desired cook 

time in hours and minutes.

4

   Touch STOP TIME. Use arrows to select desired time 

oven should turn off.

5

   Touch  ENTER. 

Summary of Contents for IR304PE/S/PH
























Reviews: