14
Wolf, Wolf & Design, Wolf Gourmet, W & Design and the colour red as applied to knobs are registered trademarks and service marks
of Wolf Appliance, Inc. Sub-Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens, The Fine Art
of Kitchen Design and Ingredients are registered trademarks and service marks of Sub-Zero, Inc. (collectively, the ‘Company Marks’).
All other trademarks or registered trademarks are the property of their respective owners in the United States and other countries.
Troubleshooting
‘E 01’ is displayed.
• Press the (keep warm) button. If ‘E 01’ is still displayed, refer to the Customer Care
information on wolfgourmet.com.
‘E 02’ or ‘E 03’ is displayed.
• Turn the knob clockwise or anti-clockwise. If ‘E 02’ or ‘E03’ is still displayed, refer to
the Customer Care information on wolfgourmet.com.
‘E 07’ is displayed.
• Press the
(start/stop) button. If ‘E 07’ is still displayed, refer to the Customer Care
information on wolfgourmet.com.
‘E 08’ is displayed.
• Press the (keep warm) and
(start/stop) buttons simultaneously and turn the
knob clockwise or anti-clockwise. If ‘E 08’ is still displayed, refer to the Customer
Care information on wolfgourmet.com.
‘FIL H2O’ is displayed.
• Lift the vessel from the base. Fill the vessel with at least 0.5L water and place the
vessel back on the base. Press the
(start/stop) button to begin heating.
NOTES:
• If water overflows from the vessel spout during heating, too much water was
added to the vessel. The MAX level is 1.5 litres.
• If the lid falls off of the vessel when pouring, the seal is not in place. Ensure the
lower seal is properly installed in the lid before each use.
Summary of Contents for ICBWGKT100S-AU
Page 16: ...840358000 07 2021 ...
