Wolf CGL Brief Description Download Page 8

3063528_201308

8

1.10. Brief description of function

The system now commences operation with the default values. The speed is 

adjusted between the set minimum and maximum speeds according to the 

CO

2

 content of the air, as captured by the CO

2

 sensor. If there is no CO

2

 sensor 

connected, the speed is set to a fixed value (adjustable using the Speed key).

For all other settings, see 

operating instructions, Control unit - CGL (document no. 3063527)

Press the r.h. rotary selector to change to control level 2.
Turn  the  r.h.  rotary  selector  clockwise  to  select  the  "Holiday 

program" menu level and confirm the selection by pressing the 

r.h. rotary selector again.
Select the zone where you want to program the holiday times and 

confirm by pressing.

Select the holiday program for which you want to program the 

holiday  times  and  confirm  your  selection  by  pressing  the  r.h. 

rotary selector again.
Turn the r.h. rotary selector to select the date for holiday start and 

then confirm your selection.
Turn to set the required date and then confirm your selection.
Follow the same procedure to set the time.
Then set the date and time for holiday end.

Next,  under  Program  selection,  select  "Standby"  and  confirm 

your selection.
You can select from the following:

Standby (factory setting)

Backup mode

Economy operation

Day mode

Summer ventilation

Follow the same procedure for holiday programs 2 to 5.

1.9. Holiday program

Control level 2 - Holiday program

Holiday prog

Zone overview

 

Back

Z1 Hall 1

Z2 Zone 2

 

Back

Holiday prog

Zone 1

 

Back

Holiday prog

Holiday prog

Holiday prog

Holiday prog

Holiday prog

 

Back

Holiday prog

Zone 1

 

Back

Holiday start

Date 01/01/09

Time 00:00

Holiday end

Date 01/01/09

Time 00:00

Prog. selection

Standby

 

Back

Summary of Contents for CGL









Reviews: