Wolf CGL Brief Description Download Page 5

3063528_201308

5

Pressing the r.h. rotary selector

  calls  up  control  level  2, 

where you can select the menu levels shown in the overview by 

turning the rotary selector clockwise. After selecting the required 

parameter,  you  enter  the  submenu  by  pressing  the  r.h.  rotary 

selector again.

Pressing  the  Info  key  takes  you  back  to  the  standard  display, 

irrespective of which submenu is currently displayed.

The system also returns to the standard display automatically when 

no adjustment is made for more than one minute.

1.6 Control level 

overview

All available set and actual temperatures, the operating mode and 

other system values can be displayed.

This  is  explained  in  the 

"Displays"

  section  in  the  operating 

instructions.

Displays

Acknowledgement (resetting) of faults that have occurred.

This is explained in the 

"Fault messages"

 section in the

operating instructions.

Faults acknowledge

Setting of the most important parameters in the ventilation system 

such as time, date, room temperature, night temperature, supply 

air minimum limit for heating, backup temperature, night setback, 

and night ventilation.

Setting options and explanations of the individual parameters are 

given in the 

"Basic settings"

 section in the operating instructions.

Basic settings

Modification  of  the  time  programs  for  ventilation  or  air  change 

operation.

Setting options and how to modify the individual time programs 

are explained in the 

"Time programs"

 section.

Time programs

Setting of the HVAC contractor's parameters for the ventilation 

system.

Setting options and explanations of the individual parameters are 

given in the 

"Specialist"

 section in the operating instructions.

Specialist

Main menu

 

Back

Fault ackn.
Basic settings
Time program
Holiday prog
Specialist
  Back

Display

Control level 2 - Overview

Five different holiday programs can be set. The holiday program 

takes precedence over the standard switching time.

Holiday program

Summary of Contents for CGL









Reviews: