Wolf CGL Brief Description Download Page 3

3063528_201308

3

Automatic mode

Ventilation or air change according to a time program. Activation 

of HR, reheater and fan according to demand. 

As shown in the diagram, you can preselect the operating mode 

via the time program when the system has been switched off.

This is explained in the section 

"Automatic mode"

 in the operating 

instructions.

L.h. rotary selector, program selection

This rotary selector enables the program to be selected. The rotary 

selector can be rotated infinitely and has noend stop. You will feel 

it click into each position as it rotates. The selected function is 

indicated by an arrow in the display.

Set the arrow to the clock symbol.

R.h. rotary selector

 

All programming is done using the right hand rotary selector. 

Turning  the  rotary  selector  enables  you  to  select  the  required 

menu item.

Pressing the r.h. rotary selector confirms the programming step.

06:00

22:00

On

Off

„Day mode”

Time

Program for setback mode

Selection:

- Economy operation

- Backup mode (factory setting)

- Standby

-  Summer ventilation

Backup mode

Backup mode

1.4. Setting the operating mode

Control level 1

07:00

14:00

Summary of Contents for CGL









Reviews: