8 0 8 7 4 4 - W o l f 3 0 ' ' ( 7 6 2 ) M i c r o w a v e T r i m K i t
I n s t a l l a t i o n I n s t r u c t i o n s
808662 / Rev D / May, 2009
Mounting
Bracket
Screws
Mounting
Brackets
Figure 1. Mounting Brackets
Frame Assembly
Figure 3. Frame Assembly
Exhaust Duct
Assembly
Exhaust Duct
Mounting Screws
Figure 2. Exhaust Duct Assembly
3. Locate mounting brackets. Pre-drill pilot holes
before installing screws to avoid damage to cabinet
or trim kit hardware. Attach mounting brackets with
supplied screws, making sure brackets do not
extend beyond front surface of cabinet
(See Figure 1).
4. Center exhaust duct assembly in opening. When
centered correctly, its flanges will be tightly against
lower front edge of opening. Secure with mounting
screws (See Figure 2).
5. Place oven adjacent to wall or cabinet opening,
then plug power supply cord into electrical outlet.
6. Carefully guide oven into opening. Slide oven onto
exhaust duct assembly.
NOTE:
Avoid pinching power cord between oven
and wall.
7. Position frame assembly to be square with oven.
Carefully place frame assembly on oven. Check
that it is level (See Figure 3).
8. Secure frame assembly with mounting screws
(See Figure 4).
9. Snap the polycarbonate trim pieces into place cov-
ering the screw holes.
Page 2 of 2
Trim Kit
Mounting
Screws
Figure 4. Trim Kit Screws
