16
en
Maintenance
Replacing the cord spool
1
The trimmer continues to spin after being
switched off! Always remove battery be-
fore performing any work on the trimmer!
1. Forcefully press both catches together on the
spool cover
and remove
.
2. Remove line spool.
3. Remove any soiling.
4. Feed the end of the line from the new line spool
through the line eyelet in the housing cover and in-
sert the spool cassette into the housing cover
.
3
Ensure that the line spool is inserted as il-
lustrated.
5. Attach spool cover to the line spool holder, ensur-
ing that both catches click into position
.
1
When the lawn trimmer is switched on, the
line is cut to working length. Switch on unit
in operating position only.
Faults and how to remedy
Problem
Cause
Remedy
Tilt switch
is not wor-
king.
String
breaks too
frequently
When in doubt, always consult a WOLF-Garten service workshop.
M
• Spool is empty.
• Fit new spool.
• Dirt and debris in spool drive mechanism.
• Clean parts with a brush.
• Line is torn and stuck inside spool.
• Remove spool, check tightness of winding
and replace spool in the usual way.
• Line is „welded“ to itself or to spool through
heat build-up.
• Remove welded line section, check tightness
of winding and replace spool in the usual
way.
• Coil too dry or brittle.
• Place the coil in a container with water for ap-
prox. 24 hours. Dry and reinstall it.
• String in contact with fence posts, trees, etc. • Use plant guard.
1
Switch off the trimmer and disconnect the battery before inspecting, cleaning or working on the
thread.
