15
en
3
Instructions for the handling of the charger
• Red LED (5) is on: Battery is being charged.
• Green LED (5) is on: Charge process com-
pleted.
• Red LED flashing (5): Error
1
Self-discharge of batteries!
Remove the battery from the charger once it is
fully charged.
3
General instructions:
regarding the battery In order to maintain the
long service life of the battery, always follow
the instructions below:
• The lawn trimmer are automatically switched
off when the battery voltage is low. The bat-
tery must then be recharged before the
shears can be used again.
• Always recharge the lithium-ion battery pri-
or to any prolonged period of non-use, i.e.
before storing the shears away in autumn.
• The charging time is approx. 2 hours for a
completely discharged battery.
• The lithium-ion rechargeable battery can be
charged at any charge level and charging
can be interrupted at any time without dam-
aging the battery (no memory effect)
Settings
The lawn trimmer is equipped with a four-position ad-
justable working angle. This enables you to easily
trim hard-to-reach areas in your garden.To set the
ideal working position, please follow the instructions
below.
3
The cutting head should be inclined slight-
ly forward while trimming.
Working angle
Free trimming - Working angle 1 and 2
A
During free trimming, you should swing the trimmer in
a semi-circular motion in front of your body.
• Set working angle
.
Trimming under bushes / on slopes - Working
angle 3
B
• Set working angle
.
Edge function (horizontal cut) - Working angle
4
C
The edge function enables precise and convenient
trimming along the edge of the lawn.
1. Turn cutting head 90°
.
2. Set working angle
.
Plant hoop guard
The plant hoop guard protects bushes, trees and
plants
L
(1). When edging, the plant hoop guard
must remain in the position illustrated in
L
(2).
Telescoping handle and grip
The trimmer is adjusted to your body height by means
of the telescoping handle and the middle grip
J
K
.
On / off switch
(2)
1
Caution! Spinning strands
Tool continues spinning after switching off!
Switching on the device
• Press and hold down the on/off switch.
Switching off the device
• Release the on/off switch.
Thread adjustment
(3)
The thread is adjusted with the tilt switch. Briefly tilt
the running machine on a firm base, e. g. paving slab
(approx. 3 kg pressure). Approx. 2,5 cm cutting
thread are the automatically paid out.
3
Tips on trimming
• Cut high grass slowly, step by step.
• You can prolong the life of your trimmer by
removing grass from the ventilation slots and
the bottom of the trimmer be-fore or after
each use.
• In order to take full advantage of the battery
capacity, you should not switch the trimmer
on and off unnecessarily.
G
G
H
G
F
L
