Maintenance
Cleaning
Note: Disconnect electricity by unplugging cable
at the socket before proceeding. Attention: Keep
hands clear of moving blade.
Clean mower thoroughly after each mowing with cloth or
brush.
Clean the mulch flap at regular intervals with a small broom
S
.
Do not spray with water.
Winter Storage
• Clean mower thoroughly before storing away.
• Have your mower thoroughly checked once a year by an
approved Service Centre.
•
Do not store it in a wet or humid place.
Change of cutter blade
T
Note: always disconnect mains supply and wear
protective gloves before undertaking any work at
the cutter blades, cutter bar and blade coupling.
Change cutter blade using 10 mm spanner as illustraded.
Torque wrench setting for screws 8-10 Nm. Take care to
carry out this work thoroughly. Use original spare parts only.
Note: Sharpining of blades should be done by an
approved service centre as the correct balance of the
blade after sharpening is very important and ought to
be checked by an expert.
Faults and how to remedy
Remedy (X) by:
Problem
Possible cause
WOLF
service-workshop
Yourself
Uneven running, heavy
vibrations in the mower
• Blades damaged
• Blades loose in the fastening parts
X
---
---
X
Motor will not run
• Fuse blown
• Cable damaged
Important! If you inadvertently cut through the
cable, the fuse (16 Amp.) will not always blow.
In the interest of safety, never touch damaged or servered
cables before disconnecting the mains plug. Repairing the
cable with insulating tape is prohibited.
---
X
X
---
Poor mowing
• Blunt blades
• Incorrect cutting height
X
---
---
X
Poor catching
• Blunt blades
• Catcher bag blocked
• Incorrect cutting height
X
---
---
---
X
X
When in doubt, always consult a WOLF service workshop.
Important: switch off the mower and disconnect the mains plug before inspecting, cleaning or working on the blades.
15