27
72V Li-ION POWER 34-37-40
Operation
EN
Adjusting the cutting height (Fig.
M
)
DANGER !
Risk of injuries due to the rotating mower
blade.
¾
Only adjust the lawnmower with the
motor switched off and the mower blade
at a standstill.
Î
Switch the motor off.
SAFETY ROUTINE
¾
Switch the motor off.
¾
Open the cover
O 1
.
¾
Turn the safety key clockwise until it reaches
position "
0
"
P
2
.
¾
Use the power pack release device
O
5
.
¾
Put the power pack into position 1
O
3
for
storage and transport.
¾
Close the cover
P
3
.
Î
Pull the lever out slightly
M 1
.
Î
Set the desired cutting height
M 2
.
Î
Release the lever again
M 3
.
Note (cutting height – grass condition)
Where possible, to protect the turf of the
lawn, mow the grass when it is thoroughly
dry.
Set a cutting height of 45 mm (1 3/4”)
When cutting damp or long grass mow with
a higher cutting height.
Switching the lawn mower on/off (Fig.
Q R
)
CAUTION !
Risk of injuries due to the rotating mower
blade.
¾
Do not switch the lawnmower on if you
are standing in front of the grass ejector
opening!
¾
Switch on the lawnmower on a level
surface.
Attention !
¾
Do not switch the lawnmower on in long grass -
if necessary raise it slightly, as shown in
Q
.
Switching the motor on (Fig.
R
)
Î
Insert the power pack.
Î
Press and hold the button
R 1
.
Î
Pull the operator presence control
R 2
in.
Î
Release the button
R 1
.
Switching the motor off
(Fig.
R
)
Î
Release the operator presence control
R 3
.
SAFETY ROUTINE
¾
Open the cover
O 1
.
¾
Turn the safety key clockwise until it reaches
position "
0
"
P
2
.
¾
Use the power pack release device
O
5
.
¾
Put the power pack into position 1
O
3
for
storage and transport.
¾
Close the cover
P
3
.
Activating the cut/collect function
(Fig.
L S T
)
DANGER !
Risk of injuries due to the rotating mower
blade.
¾
Only adjust the lawnmower with the
motor switched off and the mower blade
at a standstill.
The lawnmower is equipped with a
changeover switch (cut-collect/mulch). .
Use this switch to choose between the
functions cut-collect and mulching for
your lawn care.
Î
Switch the motor off.
SAFETY ROUTINE
¾
Switch the motor off.
¾
Open the cover
O 1
.
¾
Turn the safety key clockwise until it reaches
position "
0
"
P
2
.
¾
Use the power pack release device
O
5
.
¾
Put the power pack into position 1
O
3
for
storage and transport.
¾
Close the cover
P
3
.
Î
Raise the delector lap
T 1
.
Î
Remove the grass collector
T 2
.
Î
Lower the delector lap again
T 3
.
Î
Turn the switch to cut-collect
S 1
.
Î
Raise the delector lap
L 1
.
Î
Hook the grass collector on
L 2
.
Î
Lower the delector lap again
L 3
.
Summary of Contents for 72V Li-ION POWER 34-37-40
