Transport and storage
24
EN
Transport and storage
WARNING!
Risk of injuries due to the cutting tool.
¾
Before transport or storage, switch off
the device and wait until the cutting tool
comes to a standstill.
¾
Remove the power pack before transport
or storage.
Storage
Î
Thoroughly clean your device at the end of each
season.
Î
Always store the device in a dry and safe location
that is inaccessible to children.
Î
Store the power pack and hedge trimmer sepa-
rately.
Î
Store the power pack in a cool and dry location.
Recommended storage temperature 0 - 23°C.
Î
Keep the hedge trimmer and especially its plastic
components away from brake fluids, petrol,
mineral oil containing products, penetrating oils
etc. They contain chemical substances that can
damage, attack or destroy the plastic components
of the hedge trimmer.
Î
Fertilizers and other garden chemicals contain
substances that may have a highly corrosive
effect on the metal parts of the hedge trimmer.
Therefore do not store your hedge trimmer in the
vicinity of these substances.
Troubleshooting
WARNING!
Risk of injuries or material damage
¾
In case of doubt always take your mower to a specialist workshop.
¾
Before any inspection or any work on the device, switch off the motor and remove the power
pack.
Problem
Possible cause
Remedy
The device switch-
es
off.
The power pack is too hot.
Allow the power pack to cool.
The power pack is discharged.
Charge the power pack.
The temperature of the device (electronics) is too
high.
Allow the device to cool and if necessary,
clean the ventilation slots
Overcurrent release
If this occurs again take your device to a
specialist workshop.
The device will not
switch on.
switching the device
on
The power pack is discharged.
Charge the power pack.
Overvoltage release
If this occurs again take your device to a
specialist workshop.
Overcurrent release
If this occurs again take your device to a
specialist workshop.
Power pack temperature too high or too low
Allow the power pack to cool down or
warm up.
The power pack is defective.
Replace the power pack.
The cutting blade
becomes hot.
The cutting blade is blunt.
Consult a specialist workshop.
There is a lot of friction because of a lack of
lubrication.
Oil the cutting blade.
Uneven running,
severe vibration of
the hedge trimmer.
The cutting blade is damaged.
Consult a specialist workshop.
The cutting blade fastening has come loose.
Consult a specialist workshop.
