Wolf cinema REF-1000, Owner'S Manual

Page: 43 / 115

43
• INPUT: Corresponding to where on the projector’s input panel the source is connected.
• IN MENU: If checked (default, except for automatically defined channels with unchanged parameters), this
defined channel will then appear in the list available when Channel key is pressed. If unchecked, the channel must
be accessed via Channel on the keypad or via the Auto Source function.
NO TE: Onscreen display of the channel list
is an option that must be set in the Menu Preferences menu.
• AUTOSOURCE:
If checked, (default), the projector can automatically locate this channel when an incoming input
signal matches. If not checked, the projector can locate the selected channel only when it is directly selected via
Channel on the keypad — and a change in input signal will not result in a channel change.
• LOCKED: If checked, all of the Picture Adjustments for this channel are disabled. If unchecked (default), all
available Picture Adjustments can be adjusted as desired. You cannot use Quick Setup with a locked channel.
• PREVIOUS CHANNEL: Select this option to see or change Channel Edit settings for the previous channel in the
Channel Setup list.
• NEXT CHANNEL: Select this option to see or change Channel Edit settings for the next channel in the Channel
Setup list.
3.6 Adjusting the Image
The most commonly used options for image adjustments are accessed through two menus, both of which appear
in the Main menu:
Size and Position ( Menu 1 ) and Image Settings ( Menu 2 ),.
From either of these two menus, you can change settings affecting the image from the current channel by working
with the appropriate slide bars, checkboxes and pulldown lists. Exit will return to the previous menu (or to the