821667: VAMP2 Series User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
2
VAMP2 Series User Guide
Safety Instructions
Safety Instructions
1.
Read, keep, and follow all of these instructions; heed all warnings.
2.
Do not use this equipment near water.
3.
Use only a dry cloth to clean the equipment.
4.
Do not block any ventilation openings. Install only in accordance
with the instructions in the section entitled, “
Installation
Recommendations
” on
page 3
.
5.
Do not install near any heat source such as a radiator, heat register,
amplifier, or stove.
6.
Do not expose the equipment to rain or moisture.
7.
Do not attempt to plug the unit into a two-blade outlet (with only
two prongs of equal width).
8.
Protect the power cord from being walked on or pinched,
particularly at plug’s source on the equipment and at the socket.
9.
Use only the attachments/accessories specified by the
manufacturer.
10.
Unplug the equipment during lightning storms or when unused
for long periods of time.
11.
Refer all servicing to qualified service personnel. Servicing will be
required under all of the following conditions:
•
The equipment has been damaged in any way, such as when
the power-supply cord or plug is damaged.
•
Liquid had been spilled or objects have fallen onto the
equipment.
•
The equipment has been exposed to rain or moisture.
•
The equipment does not operate normally.
•
The equipment has been dropped.
IMPORTANT:
By design, these monitors will only plug into a three-prong outlet for
your safety. If the plug does not fit into your outlet, contact an
electrician to replace the obsolete outlet.
USO
RESTRITO
