Operating the Locator
28
Fig. 16: Rear of the Locator: the arrow
points towards the slot used to secure
the telescopic pole.
Fig. 17: Upper part of the telescopic pole
•
To be able to hold the Locator flat against the
wall, slide the straight part of the holder (1) in-
to the slot on the rear of the Locator
or
•
To be able to view the display as you work,
slide the angled part of the holder (2) into the
slot.
•
Undo the clamp (3) on the telescopic pole.
Pull out the telescopic pole to the desired
length and then tighten the clamp (4).
Fig. 18. Locator secured to the angled
part of the holder (2) of the telescopic
pole – the display is clearly visible.
1
2
3
4
