Page 5
CHAPTER 1: Installation
Introduction
Overview
The iAM-MADI units are 1RU multichannel MADI audio monitors with BNC input and
output coax and optional optical fiber connections. Optical fiber connections require
an optional SFP hardware module and software license. Refer to Specifications
section for or contact Wohler sales for more information.
The iAM-MADI has individual channel volume controls and mute switches. Any
channel in the MADI stream may be audibly monitored and mixed with the other
selected channels. The IAM-MADI is small, low-cost, and simple to operate. Its
setup configuration can easily be copied to other IAM-MADI units.
Setups are created with a web browser over a network connection. Each iAM-MADI
can be configured with a number of presets. Nothing about the configurations of
those predefined setups can be changed from the front panel. This prevents less
experienced or hurried operators from making accidental setup changes that could
compromise their usage of the unit. It also reduces operator training to a minimum.
Safety
Instructions
1.
Read, keep, and follow all of these instructions; heed all warnings.
2.
Do not use this equipment near water.
3.
Use only a dry cloth to clean the equipment.
4.
Do not block any ventilation openings.
5.
Do not install near any heat source such as a radiator, heat register, amplifier, or
stove.
6.
Do not attempt to plug the unit into a two-blade outlet (with only two prongs of
equal width).
7.
Protect the power cord from being walked on or pinched, particularly at plug’s
source on the equipment and at the socket.
8.
Use only the attachments/accessories specified by the manufacturer.
By design, this monitor will only plug into a three-prong outlet for your safety. If the
plug does not fit into the outlet, contact an electrician to replace the obsolete outlet.
