Page
14
CHAPTER 4: Using the iAM-MADI Web
GUI
The IAM-MADI Web GUI allows you to customize the monitor’s configuration to
perfectly suit your needs. The default presets configure all 64 MADI channels in
consecutive fashion. The following setup steps are not necessary to use the iAM-
MADI in the default configuration.
Web Browser / Control Device
Any web browser application running on any networked device such as desktop or
laptop computer, tablet or smart phone can be used with the iAM-MADI Web GUI.
Tablets would need to be linked to a copper LAN through a Wi-Fi adapter if the
tablet has no network connector.
Phones are not recommended due to their smaller screen size that will require more
scrolling.
The Chrome
®
web browser is recommended for speed and compatibility.
First Time- IP Assignments
The iAM-MADI operates with a static (fixed) IPv4 address. The address will be
172.27.2.2
when received from the factory or when reset at the front panel. The
iAM-MADI address will need to be changed to some other address to be compatible
with the customer’s network address assignments. Go to iAM-MADI
Network
Setup
,
immediately after this host setup is done, to change the unit’s address.
The surest way to do this, free of possible network conflicts, is to establish a direct
peer-to-peer connection between the setup computer and the iAM-MADI. A
10/100/1000 MHz Ethernet switch may be used in between, but is not required.
Figure 4-1 below shows an example of suitable address settings for the host
computer in a Windows 7 control panel.
Figure 4–1 Host IP Settings
