Page 41
How Do I Set Up a SuperPair Volume Control?
A SuperPair is a 9th audio input pair that can be heard along with the normally
monitored audio channels. You can reconfigure the front panel Balance control to
become a SuperPair Volume control, that will work independently of the main front
panel Volume control. Like the main Volume control, the SuperPair Volume
control can be pressed to dim or mute the SuperPair audio.
This setup is done in the Hardware Configuration Menu:
Configuration Selection
Menu
Main Screen
Menu
Configure
Options
Option
Configuration Menu
Hardware
Configuration Menu
Configure
Hardware
Figure 3–20: Hardware Configuration Menu
Hardware Configuration Menu
Save / Exit
Help
Cancel
Unit
Info
Factory
Default
-20dBFS = +4 dBu
Analog I/O
Ref Level
Current: Internal Sync
Clock
Source
Selected Slot 4 (AES In) Pair 1
8 hours
Screen
Saver
Screen
Bright
Balance
Control
Menu Lock
SuperPair
Balance
Left
Right
16
32
1.
Turn the Balance Control knob to select SuperPair instead of Balance.
