Page
39
2.
Touch the
Cancel
button to return to the previous screen without saving any
changes.
System Reboot
Touching the
System Reboot
selection on the
System Options
Menu displays the
System Reboot
screen as shown in Figure 2-34. This function is normally only
used upon request from Wohler Technical Service to troubleshoot or correct an
issue.
The
System Reboot
function should be used with a bit of forethought. It puts the
system out of service for several minutes while it is rebooting.
Figure 2-34: System Reboot
If you have any doubt as to whether you should press
Yes
, press
Back
or
No
instead, and contact Wohler Technical Service for advice. Pressing
Back
or
No
will
return you to the
System Options
menu.
Important:
There is no confirmation for
Save and Exit
, so make sure you want to
perform this action before taking it. The system will not need to reboot
before it is once again ready for operation.
