Operating manual GMV-B
Page 19 of 28
B0823
6.5 Start-up
The function of the unit was checked in the works. Thus, the unit is ready for use and can be
connected to the local media supply systems.
Important! Consider the safety instructions in section "Power supply and
switching-on".
First fill lubricant and then start the pump unit, in every case.
The filling level must not be lower than 10-15 mm above the
reservoir’s bottom edge.
Actions to be taken for start-up:
a) Filling the unit with lubricant
Replacement of the cartridge:
Unscrew reservoir and pull back piston bar up to stop. Then insert both sides opened grease
cartridge into reservoir, and screw reservoir on.
Screw reservoir on and push the piston bar back in again completely.
