gateway.
3) In PPPoE mode, you need to enter the user name and password.
Note: All the ports are bound with the default Router Mode WAN Connection. If you
setup another Bridge Mode WAN connection, the port which you choose to bind
with the bridge WAN connection will de-bind with the WAN connection. All the WAN
connection in Router Mode shared the Bind Port (exception the port bind with
Bridge Mode WAN Connection).
You need to select a Connect Type Setting in the WAN Connection configuration.
You can choose the STATIC IP, DHCP and PPPoE for different network application.
Below is the page as you choose the STATIC IP. You should configure the IP address,
Mask, Gateway and DNS.
Below is the page as you choose the STATIC IP. You should configure the PPPoE user
name and password here.
If you choose DHCP, the router willl obtain an IP address automatically from the up-layer
device.
Bridge Mode:
If you use bridge mode, L2 frame produced by WAN port and port binding
to WAN is transparent transmission. Under this application condition, PC or other terminal
after connecting will get IP address from up-layer device.
