_________________________________________________________________________________________
www.wnt.com
XND.00016.012_A – 04/2018
27
4.2
Alignment with double or multiple arrays
When clamping several quick-change palleting systems, the plates are positioned and
clamped as described in 4.1.
For lateral alignment, it is possible to use the alignment faces on the side, for example using
end dimensions.
4.3
Covers
4.3.1
Cover sheets for longitudinal locking grooves
Insert the cover sheets after clamping the plates.
The delivery includes 5 off cover sheets.
Fitting
2)
Insert the sheet at the rounding
In to the slotted groove.
To remove the sheet, press it down on one side until it disengages from the groove.
2) Bend both ends by
pressing with the fingers.
3) Allow sheet to engage in
the groove at both ends.
Bend the ends by pressing
with the fingers.
