64
3. Clean the connector to which the combination spout
7
was fitted with a damp cloth.
4. Dismantle the combination spout
7
and clean it
thoroughly (completely) under running warm water.
Clean the ducts with the pipe cleaner and cleaning
brush supplied.
Figure 13
5. Then place all loose parts (including pipe cleaner,
cleaning brush, milk intake hose, intake nozzle and
angle piece) in cleaning solution for at least 5 hours.
To prepare this cleaning solution, fill a container with
0.5 l of lukewarm water, add 5 ml of WMF special
cleaner (Order No. 33 0683 6000) from the dosing
bottle and stir thoroughly. The parts must be
completely covered by the cleaning solution. (After
this, the parts are sterile. It is important to ensure no
new germs come into contact with them during
subsequent handling).
6. Rinse parts thoroughly under running (preferably
warm) water.
7. Reassemble the combination spout
7
and fit to
machine.
8. Now draw off one portion of hot water and turn the
lock switch to “
R
”.
9. Place the milk intake hose in the hot water and keep it
there. Then press the button. The steam flow
completes the cleaning process.
Caution!
Risk of scalding
– cleaning fluid flows out of the
combination spout
7
.
Cleaning fluid will be flushed through the
combination spout
7
for about 1 minute.
Then turn the lock switch to “
I
”.
Further recommendations:
