63
If the machine is excessively soiled, this will be detected
by your WMF BISTRO and the following cleaning prompt
will appear on the display:
-> Machine OFF / ON
Start CLEANING new!
The automatic cleaning program must then be run again
(see
8.1.1 Cleaning the machine
on page
62
)
8.1.2
Cleaning the combination spout
Warning!
For reasons of hygiene, all surfaces in contact with milk
should be cleaned at least once a day. The milk intake
hose should therefore be replaced at regular intervals.
Proceed as follows:
1. Press the release lever at the back of the combination
spout
7
and pull spout forward to remove (see Fig. 10
and Fig. 11).
Figure 10
Figure 11
2. Remove the milk intake hose from the clamping valve
by pulling both ends of the milk intake hose forward
and lifting it up out of the bracket (see Fig. 12).
Figure 12
Warning!
Risk of injury when removing and fitting the milk intake
hose in the clamping valve
