manualshive.com logo in svg

WMF 1500S+, User Manual, Page: 71 / 120

Share
Download
WMF 1500S+ User Manual Download Page 71

71

User Manual WMF 1500 S +

Care | Care safety instructions

Health hazard / hygiene

• 

All cleaning agents are perfectly tuned to the 
cleaning programs.

 

> Use only WMF cleaning and descaling media.

  

Health hazard /  

irritation and scalding hazard

• 

Hot cleaning fluid and hot water runs out of 
the combi spout when cleaning.

• 

Hot liquids can irritate the skin, and the heat 
poses a burn hazard.

 

> Never reach under the spouts while cleaning.

 

> Always lock out the touch display with 

“CleanLock” before cleaning.

 

> Ensure that no one drinks the cleaning 

solution.

  

Dynamic Milk

If no beverage with milk has been dispensed for 
119 minutes, an automatic milk system cleaning 
is started and the system is filled with fresh milk. 

  

note

• 

The next time the coffee machine is switched 
on, the milk will be filled again and the 
cleaning program will be finish.

  

 CaUtion

Follow the Safety chapter  

w

 starting on page 7

 CaUtion

Follow the Safety chapter  

w

 starting on page 7

notE

notE

Summary of Contents for 1500S+

























































































































Reviews:

No comments