manualshive.com logo in svg

WMF 1500S+, User Manual, Page: 105 / 120

Share
Download
WMF 1500S+ User Manual Download Page 105

105

User Manual WMF 1500 S +

Safety and warranty

Please observe the following instructions so as to 
prevent problems with and damage to the coffee 
machine:

• 

For drinking water with carbonate hardness from 
5 °dKH or higher, a WMF water filter must be fitted; 
otherwise, the coffee machine can be damaged due 
to build-up of scale.

• 

For insurance reasons always ensure that, at the 
end of operation the mains switch is switched off 
or the mains plug is unplugged. For machines with 
a constant water supply, the water mains tap for the 
inlet pipe must be closed.

• 

We recommend damage prevention measures, 
such as:

 

- installation of a suitable water monitor in the 

mains water supply line

 

- installation of smoke alarms

• 

After a company holiday (several days or weeks) 
we recommend running the cleaning mode at least 
twice before reusing the machine.

System cleaning  

w

 Cleaning  programs   

page 73

Summary of Contents for 1500S+

























































































































Reviews:

No comments