WL-G930 Series Router User Manual
60
Figure 3-1
Firmware Upgrade GUI
When upgrading, please don’t cut off the power.
2.10
“Reset” Button for Restore Factory Setting
If you couldn’t enter web interface for other reasons, you can also use this way.
“Reset” button is near to Console port in WL-G930 panel, This button can be used when
the router is in use or when the router is turned on.
Press the “RST” button and keep more than 8 seconds till the NET light stopping blink.
The system will be reverted to factory.
Table 2-33
System Default Instruction
Parameter
Default setting
LAN IP
192.168.1.1
LAN Subnet Mask
255.255.255.0
DHCP server
Enable
User Name
admin
Password
admin
