
WIZ200WEB User’s Manual
© Copyright 2007 WIZnet Inc. All rights reserved
13
⑤
Serial Connector(UART0)
The debugging information is transmitted through Serial connector when proceeding
development.
⑥
Serial Connector(UART1)
The debugging information is transmitted through Serial connector when proceeding
development.
⑦
LED
4 LEDs are installed in the WebServer Base Board, and connected to PORTB.4~7.
.
Figure 6. WIZ200WEB Base Board LED
⑧
System Reset Switch
⑨
Switch
Switch is connected to PORTE.5~6. It is the slide switch.
Figure 7. WIZ200WEB Base Board Switch
⑩
16X2 character LCD
16x2 LCD is controlled with the method of 4 bit control It is connected to PORTD and