Wiznet WIZ140SR, User Manual, Page: 9 / 27

WIZ140SR/WIZ145SR Datasheet 5
3.2.2 Command code(Direction: Serial device -> MODULE)
Code Parameter Comments
General Info R_PC None Get Product Code
R_IP None Get Local IP Address
W_IP xxx.xxx.xxx.xxx Set Local IP Address
R_SN None Get Subnet Mask
W_SN xxx.xxx.xxx.xxx Set Subnet Mask
R_GW None Get Gateway Address
W_GW xxx.xxx.xxx.xxx Set Gateway Address
R_FW None Get Firmware Version
R_DB None Get Debug mode value
W_DB 0: Disable
1 : Enable
Set Debug mode value
R_MD None Get IP setting mode value
W_MD 0: Static
1: DHCP
2 : PPPoE
Set IP setting mode value
R_CM None
Get Serial command mode type
W_CM 0: H/W trigger
1: S/W trigger
Set Serial command mode type
R_SC None Get Serial command mode character
W_SC xxxxxx
Set Serial command mode character
R_DS None Get DNS Server IP Address
W_DS xxx.xxx.xxx.xxx Set DNS Server IP Address
W_XX None Reboot module
Channel Info RnSM None Get Socket operation mode
n : channel number( 0 ~ 3)
WnSM 0: TCP Server
1: TCP Client
2: Mixed
Set Socket operation mode
n : channel number( 0 ~ 3)
RnCS None Get Socket connection state
n : channel number( 0 ~ 3)
RnDM None Get DNS mode value