Wiznet WIZ140SR, User Manual, Page: 10 / 27

WIZ140SR/WIZ145SR Datasheet 6
n : channel number( 0 ~ 3)
WnDM 0: Disable
1: Enable
Set DNS mode value
n : channel number( 0 ~ 3)
RnUM None Get UDP mode value
n : channel number( 0 ~ 3)
WnUM 0: Disable
1: Enable
Set UDP mode value
n : channel number( 0 ~ 3)
RnSI None Get Remote Peer’s IP Address
n : channel number( 0 ~ 3)
WnSI xxx.xxx.xxx.xxx Set Remote Peer’s IP Address
n : channel number( 0 ~ 3)
RnLP None Get Local port number
n : channel number( 0 ~ 3)
WnLP 0 ~ 65535 Set Local port number
n : channel number( 0 ~ 3)
RnSP None Get Remote Peer’s port number
n : channel number( 0 ~ 3)
WnSP 0 ~ 65535 Set Remote Peer’s port number
n : channel number( 0 ~ 3)
RnSD None Get Remote Peer’s Domain name
n : channel number( 0 ~ 3)
WnSD xxxxxxxxxxxxxxx(Variable) Set Remote Peer’s Domain name
n : channel number( 0 ~ 3)
RnBU None Get Serial configuration value(Baud
rate, data bit, parity and flow control)
n : channel number( 0 ~ 3)
WnBU xxxx
[Baud]
0
115200
1 57600
2 38400 4 19200
4 9600 5 4800
6 2400 7 1200
[Data]
0 7bit 1 8bit
[Parity]
0 1 2
Set Serial configuration value(Baud
rate, data bit, parity and flow control)
n : channel number( 0 ~ 3)
4Bytes : [Baud][Data][Parity][Flow]